Sony a (alpha) DSLR-A100 User Manual

78
Viewing images on a TV screen
You can view images on a TV screen by
connecting the camera to a TV.
Turn off both your camera and the TV
before connecting the camera and the TV.
1 Connect the camera to the TV.
2 Turn on the TV and set the TV/
video input switch to “video.”
• For details, see the operating instructions
supplied with the TV.
3 Turn on the camera, and press
(Playback).
Images shot with the camera appear on
the TV screen.
Press b/B on the controller to select the
desired image.
• When using your camera abroad, it may be
necessary to switch the video signal output
to match that of your TV system (page 98).
• When you display the images recorded in
Adobe RGB mode on the camera or sRGB
devices, such as on TVs/LCD monitors that are
not compatible with Adobe RGB (DCF2.0/
Exif2.21), the images are displayed by lower
intensity level.
• The LCD monitor on the rear of the camera does
not turned on.
• The image quality displayed on a TV screen is a
little deteriorated comparing to images
displayed on a PC monitor.
1 To video input jack
Video cable
2 To the VIDEO
jack
Controller
button

Sony a (alpha) DSLR-A100 Specifications

General

Sensor Type	CCD
Sensor Size	23.6 x 15.8 mm
Effective Pixels	10.2 MP
Autofocus Points	9
Screen Size	2.5 inches
Viewfinder Type	Optical (pentamirror)
Weight	638 g (body only)
Shutter Speed	30 - 1/4000 sec
Continuous Shooting	3 fps
Image Processor	BIONZ
Video Recording	No
Dimensions	133 x 95 x 71 mm
ISO Sensitivity	ISO 100-1600
Storage Types	CompactFlash (Type I or II)
Battery Type	NP-FM55H
Lens Mount	Sony A-mount