146
• High speed sync mode is not available when the two-second self-timer or [Rear sync.] is selected.
• If a flash meter or a color meter is used, high speed sync mode is not available because the proper
exposure cannot be attained. Either deactivate the high speed sync mode (“HSS” does not appear on the
LCD window of the flash) or select a shutter speed slower than the flash sync speed.
FDA-A1AM Angle Finder/FDA-M1AM Magnifier
When using the Angle Finder or Magnifier, remove the eyecup.
• The eyepiece sensors located below the viewfinder may be activated. Setting [Eye-Start AF] to [Off] is
recommended (page 85).
To Next Page
Loading...
