1
2
Press the (Quick Settings) button on the remote control, then select
[Settings] — [System] — [About] — [Reset] — [Factory data reset].
Delete everything.
If you have set a PIN code on your TV, you will be prompted to input it.
After the factory reset process completes successfully, the TV will start the Initial Setup
wizard. You must agree to the Google Terms of Service and Google Privacy Policy.
[107] Start here | Start here
Frequently Asked Questions for Troubleshooting
For troubleshooting information, you can also refer to “Frequently Asked Questions” in our
support site below.
http://www.sony.net/androidtv-faq/
[108] Troubleshooting
Picture (quality)/screen
No colour/Dark picture/Colour is not correct/Picture is too bright.
Distorted picture./The screen flickers.
High resolution HDR pictures are not displayed.
OLED panel (only models equipped with an OLED panel)
[109] Picture (quality)/screen | Picture (quality)/screen
No colour/Dark picture/Colour is not correct/Picture
is too bright.
Check the antenna (aerial)/cable connection.
Connect the TV to the AC power (mains), and press the power button on the TV or the
remote control.
Press the (Quick Settings) button on the remote control, and select [Settings] —
[Display & Sound] — [Picture & Sound] — [Picture] to make adjustments.
For details, refer to Adjusting the picture quality page.
To Next Page
Loading...
