Sony A95L - Adjusting the Screen

1
2
Picture that is suitable for a High Dynamic Range signal.
Hint
Detailed information on input signals for broadcasts and external inputs can be
displayed.
Press the MENU button on the remote control while a broadcast or external input video
is displayed, and select [Detailed signal info] from the menu that is displayed at the
bottom of the screen.
Detailed information on the input signal (such as resolution, scanning method, and
frequency) is displayed. The detailed information that is displayed depends on the input
signal.
To close the display, press the (BACK) button on the remote control.
Note
Detailed information is only available for broadcasts and external inputs.
Detailed information may not be displayed based on the settings.
[32] Adjusting the picture/screen/sound quality to your preferences | Adjusting the
picture/screen/sound quality to your preferences
Adjusting the screen
You can adjust the horizontal to vertical ratio of the screen and the display area.
While a broadcast or HDMI input image is displayed, press the MENU button
on the remote control.
Set from the menu displayed at the bottom of the screen.
You can change the following main settings.
Wide mode
You can change the screen size to fit the video.
You can watch in the optimal screen mode.
Display area
You can change the display area.