2Adjustthefocusandshootthesubject.
• When the seltLtimer is activated, audio signals and the sellLtimer hunp
indicate the condition. The self-timer lamp flashes quickly and the audio
signal sounds quickly right betUre the shooting.
To cancel the self-timer
Press ®/c_ on the control button.
Note
• When you shool images using the viewfinder, use the eyepiece cover (page 28).
g-
o
- direction + direction =.
Bracket shooting allows you to shoot several images, each with different _,
degrees of exposure. This camera is equipped with an auto bracket
function. Specify the value of deviation (steps) from the base exposure, and
the camera shoots while automatically shifting the exposure. You can
choose an image that has the brightness you like after shooting is finished.
When the flash is fired, flash bracket shooting is used to shift the amount of
flash light. To shoot, press the shutter button shot by shot.
Baseexposure
1 ®/ca onthecontrolbutton--+
gn'ac (Bracket:Cont.)--* Select
thedesiredbracketstep
2 Adjustthefocusandshootthesubject.
The base exposure is set at the first shot in the bracket.
101