Specifying DPOF
Using the camera, you call specify the images and the number of images to
print before you print images at a shop or with your printer. Follow' the
procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
DPOF specifications call be operated either using the Fn button or the
MENU button. Here operation using the Fn button is described.
1 Fnbutton--+ [SpecifyPrinting]---, [DPOFsetup]---, [Marked
images]--+ [OK]
2 Selectthe imagewith_1/1_onthecontrolbutton.
3 Selectthe numberof sheetswiththe centerof thecontrol
button.
• To unspecify DPOF, set the number to "O."
4 PresstheFnbutton.
5 Select[OK]with• onthecontrolbutton,thenpressthecenter
ofthe controlbutton.
Notes
• You cannot specily DPOF on RAW data liles.
• You can specily any number up to 9.
....,.
5
r/a
Fnbutton--+ [SpecifyPrinting]--+ [DPOFsetup]--+ fall images]
or [Cancelall]--+ [OK]--+ [OK]
145
To Next Page
Loading...
