Setting the LCDmonitor
The brightness of the LCD monitor is automatically adjusted to the
surrounding lighting conditions using the light sensor (page 36).
You call set the brightness of the LCD monitor manually.
MENUbutton--_ ,.%1 --_ [LCDbrightness]--_ [Manual]--_
Selectthedesiredsetting
N0les
• When it is set to [Auto], do not cover the light sensor with yore"hand and so on.
• When using the camera with the AC-PW10AM AC Adaptor (sold separately), the
brightness of the LCD monitor is always set to the brightest setting even if you select
[Auto].
You can check the recorded image on the LCD monitor right after the
shooting. You can change the displayed time.
MENUbutton--* _ 1 --* [Autoreview]--* Selectthedesired
setting
R01e
• In auto review, the image will not be displayed in the vertical position even if
[PlaybackDisplay] is sel to [Auto rotate] (page 104).
126
To Next Page
Loading...
