2 Selecttheaperturevalue(F-
number)withthecontroldial.
• Smaller F-mnnber: The foreground and
background of the subject are blurred.
Larger F-nmnber: The subject and its
foreground and background are all ill
focus.
• You canuot check the blurring of all
image on the LCD monitor or in the
viewfinder. Check the recorded image
and adjust the aperture.
3 Adjustthefocusandshootthe
subject.
The shutter speed is automatically
adjusted to obtain correct exposure.
• When the camera judges that the proper
exposure is not obtained with the
selected aperture value, the shutter
speed flashes. In such cases, adjust the
aperture again.
Aperture (F-number)
#
o
Shutter speed
• The shutter speed may become slower depending on the aperture value.
When the shutter speed is slower, use a tripod.
• To blur the background more, use a telephoto lens or a lens that is
equipped with a smaller diaphragm (bright lens).
• Set the flash mode to _ (Fill-flash) when you shoot with the flash
(page 84). However, the flash range differs according to the aperture
value. When you shoot with the flash, check the flash range (page 86).
61
To Next Page
Loading...
