GB
22
List of icons on the monitor
The status of the monitor is set to [Display All Info.] in the default settings.
When you change the [DISP Button] setting, and press DISP on the control
wheel, the screen status will change to the viewfinder mode. You can also
display the histogram by pressing DISP. The displayed contents and their
position shown below are just a guideline, and may differ from the actual
display.
Monitor mode For playback (Basic information
display)
Viewfinder mode
In Auto Mode or Scene Selection mode P/A/S/M/Sweep Panorama mode
To Next Page
Loading...
