22
If your AV amplifier (receiver) has a Dolby
*1
Digital, Dolby Pro Logic, or DTS
*2
decoder and
a digital input jack, you can enjoy Dolby Digital (5.1ch), Dolby Pro Logic (4.0ch), or DTS
(5.1ch) surround effects.
1 Connect the digital jack of the player
and your AV amplifier (receiver).
2 Set “Audio Output Priority” to
“Coaxial/Optical” in the “Audio
Settings” setup (page 49).
3 Make the appropriate settings in
“Dolby Digital” and “DTS” under the
“Audio Settings” setup (page 52).
Otherwise, no sound or a loud noise will
come from your speakers.
Connecting to digital jacks (OPTICAL/COAXIAL)
AV amplifier (receiver)
Coaxial digital cable
(not supplied)
Blu-ray Disc/DVD player
Optical digital cable
(not supplied)
or
: Signal flow
To Next Page
Loading...
