32
Changing the mode settings
LTR SIZE* <NORMAL/2x>
•Normally select NORMAL.
•Select 2x to display selected menu item by twice size of normal.
BEEP* <ON/OFF>
•Select ON so that beeps sound when you start/stop recording, etc.
•Select OFF when you do not want to hear the beep sound.
COMMANDER <ON/OFF>
•Select ON when using the supplied Remote Commander for the camcorder.
•Select OFF when not using the Remote Commander.
DISPLAY* <LCD or V-OUT/LCD>
•Normally select LCD. The display appears on the LCD screen.
•Select V-OUT/LCD to show the display both on the TV screen and LCD screen.
INDICATOR* <BL ON/BL OFF>
•Select BL ON to light up the display window.
•Select BL OFF to turn off the back light of display window.
When you use the AC power adaptor as a power source, this item is not displayed in
the menu.
Items for CAMERA mode only
D ZOOM* <ON/OFF>
•Select ON to activate digital zooming.
•Select OFF to not use the digital zoom. The camcorder goes back to 18x zoom.
16:9WIDE* <OFF/CINEMA/16:9FULL>
•Normally select OFF.
•Select CINEMA to record in CINEMA mode.
•Select 16:9FULL to record in 16:9FULL mode.
STEADYSHOT* <ON/OFF>
•Normally select ON.
•Select OFF to release the Steady Shot function.
N.S.LIGHT* <ON/OFF>
•Normally select ON.
•Select OFF to not use the NightShot Light function.
WIND <ON/OFF>
•Select ON to reduce wind noise when recording in strong wind.
•Normally select OFF.
PHOTO* <NORMAL/FADE/SHUTTER> (CCD-TRV99 only)
•Normally select NORMAL.
•Select FADE to activate the Fade Photo function.
•Select SHUTTER to activate the Shutter Photo function.
To Next Page
Loading...
Need help?
General