40
– CCD-TRV99 only
You can record a still picture like a photograph for about seven seconds. This mode is
useful when you want to enjoy a picture such as a photograph or when you print a
picture using a video printer (not supplied).
We recommend you to use a video flash light (not supplied) when shooting in the dark.
Attach the video flash light to the intelligent accessory shoe. When appears, the video
flash lights ready for flashing.
You can also select the photo mode (NORMAL, FADE, SHUTTER) in the menu system
(p. 30).
(1) While the camcorder is standby mode, keep pressing PHOTO lightly until a
still picture appears. CAPTURE appears.
To change the still picture, release PHOTO, select a still picture again, and then
press and hold PHOTO lightly.
(2) Press PHOTO deeper.
The still picture in the viewfinder or on the LCD screen is recorded for about seven
seconds. The sound during those seven seconds is also recorded.
To record a still picture while normal recording, press PHOTO deeper. Then the still
picture is recorded for about seven seconds and the camcorder returns to Standby
mode.
FADE
PHOTO
SHUTTER
PHOTO
•••••
•••••••
•••••
•••••••
1
2
CAPTURE
PHOTO
•••••••
PHOTO
Photo recording
To Next Page
Loading...
Need help?
General