61
Advanced operations
To edit a title you have stored
In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to edit,
then change the title.
Note
You can not enter over 20 characters title.
If you take 5 minutes or longer to enter characters while a cassette is in the
camcorder
The power goes off automatically. Characters you have entered remain. Turn
STANDBY down once and then up again, then proceed from step 1.
To delete a title
In step 4, turn the control dial to select [M] then press the dial. The last character is
erased. Repeat this step until all characters are deleted.
Making your own titles
To Next Page
Loading...
