2-5
CCP-8000 IM
2. Installation to the AUX Panel
Applicable Modules
Refer to subsection “Applicable modules” of “1. Installa-
tion to the main panel”.
Installation
1. Remove the panel covers (L) and (R) from both sides
of the operation module that you want to remove. (Pull
the operation panel up by inserting fingers into the
recessed handle on the sides.)
2. Loosen the four screws (with drop-safe) fixing the
operation module.
3. Remove the operation module by holding the two
screws on the sides of the operation module.
4. Fit the operation module that you want to install into
the position as described in step 3. Fix the operation
module by tightening the four screws (with drop-safe)
on both sides.
5. Install the panel cover.
n
When two or more operation modules have already
been installed in the AUX panel, follow the procedure
as described in subsection “Applicable modules” of “1.
Installation to the main panel” to install the side that
sits next to the adjoining operation module.
3. Installation to the MKS-8075 (Extension adaptor)
Applicable modules
. MKS-8026 10 Key Pad Module
. MKS-8030 Key Frame Module
. MKS-8031JS Joystick Module
. MKS-8031TB Track Ball Module
*1
(Refer to page 2-6.)
. MKS-8032 DKS Fader Module
. MKS-8033 Utility/Shotbox Module
. MKS-8035 Key Control Module
Installation
1. Remove the module cover on both sides of the opera-
tion module that you want to remove, as shown.
2. Loosen the four screws (with drop-safe) fixing the
operation module.
3. Remove the operation module by holding the two
screws on the sides of the operation module.
4. Fit the operation module that you want to install into
the position as described in step 3. Fix the operation
module by tightening the four screws (with drop-safe)
on both sides.
5. Install the module cover. (When you want to install the
MKS-8031TB, go to *1 on next page.)
Panel cover (R)
Panel cover (L)
Screws
(with drop-safe)
Screws
(with drop-safe)
Operation module
MKS-8075
Module covers
Operation module
Screws
(with drop-safe)
Screws
(with drop-safe)
2-4. Installing the Operation Modules
To Next Page
Loading...
