Sony CDP-555ESD - Page 13

CD operation buttons
begins immediately from the
To stop play Press W.
To remove the disc | 1 Press 4.
from the disc 2 Remove the disc.
compartment. 3 Close the compartment by
pressing 4 or the disc
compartment itself.
To stop for a Press Il.
moment during To restart play, press Il again.
play.
To start play Press p after placing the disc in
immediately. the compartment. The
compartment closes and play
beginning of the disc.
When the player reaches the end of the disc
The player is automatically reset to the beginning of the disc and
stands by. TRACK indicator displays 0.
When playing discs with your stereo system
Before playing the disc, turn on the amplifier and set the input
selector to the CD player position.
When playing discs with the CD player by itself
Connect headphones to the CD player and adjust the LINE
OUT/PHONE LEVEL control.
In this case, be sure to set the DIGITAL OUT switch to OFF.
When the number for selections past the 20th is selected
It will be displayed on the TRACK indicator, but not in the music
calendar display window.
Important
Since the CD system boasts a wide dynamic range, the peaks
of high level inputs are recorded with high fidelity, and the
noise level is very low.
Do not turn up the volume while listening to a portion with no
audio signals or very low level inputs. If you do, the speakers
may be damaged when a peak level portion is played.
13