Sony CDP-991 - Timer Activated Playback; Setting Up Scheduled Playback

Timer Activated Playing
By connecting a commercially available timer, disc play of the desired play mode
can be started at any desired time.
Connection and Operation
|
|
|
4 Set the timer to a desired play start time.
5 Set TIMER to PLAY position.
| TIMER
| 2 OFF PLAY
CDP-997
=>
Play will start at the registered time.
Keep the POWER switch depressed on the player
When the timer is set, the power of the player will be cut
off.
c t ‘
Reo ae) a However, be sure to leave the POWER switch on.
When the timer-activated play ends
Be sure to set TIMER to OFF. If the TIMER switch is left
at PLAY, the player will automatically start playing the next
(Keep the power on) time the power is turned on.
To the switched outlet
To play in the program play mode
Make a program bank (page 36) and then prepare for timer
activated playing.
Connecting
AC power cord
Audio timer
1,4
To the switched outlet
If you select the custom index play mode
Play begins from custom index 1.
to an wall outlet
1 Connect the timer to the player and power
on the timer.
2 Power on the player and insert a disc in the
player.
3 Set a desired play mode.
(e.g. continuous play, program play, shuffle play,
repeat play, etc.)
AI