Sony CDP-991 - Recording Selections to Tape: Programming; Basic Tape Programming and Program Edit

Recording Programed Selections on a Tape
You can program up to 24 selections in a desired order according to the length of your
tape on which they are to be recorded. You can also program selections to be recorded
on side A simultaneously with those to be recorded on side B on your tape.
Programming and Playing
2 a) Press selection number in the desired
order.*
o> >>
Current
selection Total playing time Chosen selections
E tesg Ee
Order
If you choose wrong selections, press CLEAR.
Each time you press CLEAR, the last chosen
selection will be deleted.
*To choose a selection number over 20, see page 12.
b) To program selections while checking the
total playing time (Program Edit):
1 Press K</PPI instead of the numeric buttons
to choose selections to be programed.
Current
selection
sm
Et
Order Total playing time
Press K<4/PP1 repeatedly to choose an
appropriate selection.
2 After choosing the selections to be
programmed, press PROGRAM.
3 If you program selections on side B, press U1
to program a pause.
Order Total playing time will return to ‘‘0.00”.
ig
Lal
Seer
Pause “B" lights up.
The pause is programmed as the fifth selection.
Note that the player counts pauses as
selections to be programmed.
24