Sony CDP-991 - Custom Indexing for Track Navigation; Assigning and Using Custom Indexes

Indexing a Disc - custom Index
A custom index is a special index that can be assigned to any position you want
on the disc. If you assign custom indexes to the positions on a disc, you can
easily locate the positions during play, or enjoy repeat play between two adjacent
custom indexes.
Assigning Indexes to Your Disc
4 Press FILE to store the custom index. The
custom index is assigned to the repeat start
Point.
CHECK
:
z
FILE
Lights up.
|
1
CSTOM FE )
ioe] 1
i
Lights up.
1 Press C.INDEX during play. 5 You can assign custom indexes up to 10
ole positions by repeating steps from 2 to 4.
by
G The music calendar disappears.
To release rehearsal play
Press CLEAR, to resume normal play.
If a new custom index is assigned to a position
Preceding another index.
Previously existing indexes will be shifted as follows.
2 Press FILE where you want to assign a Example: lf you assign a new index between 2 and 3.
custom index.
FILE fiz]: [3] —_—_—_-—_- [1] 2] [3] [4]
The index number blinks
T
A new index The old index 3 becomes 4
sel
78
During custom index play
You cannot use the normal index search, however, search of custom index
function is possible.
The 3-second portion from the point where you If you press FILE in the pause mode
pressed FILE is played repeatedly (rehearsal The rehearsal play is not made and the custom index is assigned
play). immediately at the position where FILE is pressed.
If you press the MUSIC SCAN in the C.INDEX mode, the beginning of each
3 Adjust the repeat starting point using << or custom index is played.
>>.
rm 01SC MEMO —
Press to shift the repeat start point forward
and «#4 to shift it backward. Pressing <<4/>>
7 times shifts the point by approximately 1
second. Blinks
36