Sony CDP-991 - Chapter 3: Basic Operation; Continuous Playback of Discs

Chapter 3 Basic Operation
Playing a Disc - Continuous Play
in the continuous play mode, you can play the first selection or desired selection
on your disc.
Before playing a disc, turn on the amplifier and set the input selector to the CD
player position.
e 3 7 To stop play
Playing the First S
aying election To stop for a moment during play, press
Press U9 or B to resume play.
To stop play, press
To stop play and open the tray, press &.
CONTINUE
To control the volume
When you use VARIABLE, adjust the volume with LINE
OUT/PHONE LEVEL of the player or LINE OUT LEVEL of
the remote commander. Press + of the remote
commander to turn up the volume and press — to turn
down the volume. When you press + or —, LINE OUT/
PHONE LEVEL of the player rotates automatically.
LINE OUT/
RUONECEVEL When listening with headphones
Connect the headphones and adjust the volume with LINE
1 OUT/PHONE LEVEL or LINE OUT LEVEL of the remote
Press POWER. commander.
If the indicator above the CONTINUE button
does not light up, press CONTINUE. To play a 8 cm (3-inch) CD
Place it on the inner circle of the tray. If the disc is
Lights up. | owen | provided with an adaptor, first remove it. Do not put a
normal CD (12 cm/5-inch) on to of a 8 cm CD.
~= a Note on the TIMER switch
Leave the TIMER switch off when you are not using timer activated play. (For
further details, refer to page 41.)
1112/1304 15
46 [17] 18] 19 20)
What is this indication?
2 Press &. This indication appears when the tray is empty. The indication can be
changed to a customized indication. (page 34).
3 Place a disc with the printed side up on the
tray.
4 Press >.
>
The disc tray closes to start playing the first
selection.
10