Sensor Adjustment
1. With the power ON, while pressing the GROUP 4 and ·
buttons, press the +100 button to enter the mechanism
adjustment mode.
2. Press the GROUP 1 button to operate the loading mechanism,
and continue pressing until the disc table locks. (Fig-3)
3. Loosen the fixing screw, move the holder (TABLE SENSOR)
slightly, and when the LED (green) of the PLAY button
switches to the LED (orange) of the PAUSE button (or vice
versa), secure the holder (TABLE SENSOR). (Fig-4)
4. Moving the disc table right and left with a hand after the screw
is fixed, the table will move by the play of a disc table. If the
LEDs light up alternately, the adjustment will be performed
correctly. (Fig-4)
FIg-3
FIg-4
PLAY indicator
Linked with
·
indicator
Linked with
P
indicator
PAUSE indicator
To Next Page
Loading...
