Sony CDP-XA3ES - Getting Started; Hooking Up the System (XA7 ES)

Getting Started
`>
Unpacking
Check that you received the following items:
* Audio connecting cord (1)
* Remote commander (remote) (1)
+ Sony SUM-3 (NS) batteries (2)
e Stabilizer (1) (CDP-XA7ES/XASES only)
Inserting batteries into the remote
You can control the player using the supplied remote.
Insert two size AA (R6) batteries by matching the +
and - on the batteries. When using the remote, point it
at the remote sensor Bl on the player.
LQ
When to replace batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the player,
replace all the batteries with new ones.
à
Notes
+ Do not leave the remote near an extremely hot or humid
place.
¢ Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
¢ Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
* If you don’t use the remote for an extended period of time,
remove the batteries to avoid possible damage from battery
leakage and corrosion.
Hooking Up the System
(for CDP-XA7ES)
Overview
This section describes how to hook up the CL piayer to
an amplifier. Be sure to turn off the power of each
component before making the connections.
BALANCED DIGITAL OUT
BALANCED OUT switch COAXIAL
CDP-XA7ES
To an AC
LINE OUT outlet
VARIABLE
DIGITAL OUT
OPTICAL
Amplifier
Nu
Foo
COCO
2000
©
o
To an AC outlet
=D> : Signal flow
What cords will | need?
Mi When making analog hookups
e Audio cord (supplied) (1)
White White
(L) = =C W
Red Red
(R) (R)
e Cannon connector XLR-3-32 or equivalent (not supplied)
db AO
H When making digital hookups
e Optical cable POC-15 (not supplied)
Cr
e Coaxial cable (not supplied)
<( Da P