Operating
an
iPod
directly
-
Passenger
control
You
can operate an iPod connected to the dock
connector directly.
1 During playback, press and hold
(
MODE).
"MODE IPOD" appears and you will be able
to operate the iPod directly.
To
change the display item
Press
(DSPL).
The display items change
as
follows:
Track name
-+
Artist name
-+
Album name
-+
MODE IPOD
-+
Clock
To exit the passenger control
Press and hold
(MODE).
Then "MODE AUDIO" will appear and the play
mode will change to "RESUMING."
Notes
• The volume can
be
adjusted
only
by
the unit.
•
If
this
mode
is canceled, the repeat setting will be
turned off.
Other
functions
Changing
the
sound
settings
Adjusting the sound
characteristics
1 Press the select button repeatedly
until the desired item appears.
2 Rotate the control dial to adjust the
selected item.
3 Press
~
(BACK).
The setting is complete and the display
returns to normal reception/play mode.
The following items can be set (follow the page
reference for details):
EQ3
Selects an equalizer curve from 7 music types
(XPLOD, VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
LOW*1, MID*l, HI*l (page 18)
BAL (Balance)
Adjusts the sound balance between the left and
right speakers.
FAD
(Fader)
Adjusts the relative level between the front and
rear speakers.
SUB*2
(Subwoofer volume)
Adjusts the subwoofer volume.
AUX*3
(AUX level)
Adjusts the volume level for each connected
auxiliary equipment:
"+
18
dB" -
"0
dB" -
"-8
dB."
This setting negates the need to adjust the
volume level between sources.
*I When EQ3 is activated.
*2 When the audio output
is
set
to
"SUB-OUr'
(page
18).
"ArT'is
displayed
at
the lowest setting,
and
can be
adjusted up to
21
steps.
*3
When
AUX
source is activated (page
19).
-
17
To Next Page
Loading...
