-
Customizing the equalizer curve
-EQ3
"CUSTOM"
of
EQ3 allows you to make your
own equalizer settings.
1 Select a source, then press the select
button repeatedly to select "EQ3:'
2 Rotate the control dial to select
"CUSTOM."
3 Press the select button repeatedly
until "LOW;' "MID" or "HI" appears.
4 Rotate the control dial to adjust the
selected item.
The volume level
is
adjustable in 1
dB
steps,
from
-10
dB
to
+10 dB.
I
'
"'
I
LCd]
,i9C
3I
L
U~\I
I 0
:;,fiE
Repeat steps 3 and 4 to adjust the equalizer
curve.
To
restore the factory-set equalizer curve,
press and hold the select button before the
setting
is
complete.
S Press
~
(BACK).
The setting is complete and the display
returns to normal reception/play mode.
Tip
Other
equalizer types are also adjustable.
Adjusting
setup
items
-
SET
1 Press and hold the select button.
The setup display appears.
2 Press the select button repeatedly
until the desired item appears.
3 Rotate the control dial to select the
setting (example "ON" or "OFF").
4 Press and hold the select button.
The setup
is
complete and the display returns
to
normal reception/play mode.
Note
Displayed items will differ, depending on the source
and
setting.
The following items can be set (follow the page
reference for details):
CLOCK-ADJ (Clock Adjust) (page 6)
CT (Clock Time)
Activates the
CT
function: "ON," "OFF"
(page 13).
BEEP
Activates the beep sound: "ON," "OFF."
AUX-A*1 (AUX Audio)
Activates the AUX source display: "ON,"
"OFF" (page 19).
A.OFF (Auto Off)
Shuts off automatically after a desired time
when the unit is turned off:
"NO,"
"30S
(Seconds)," "30M (Minutes)," "60M (Minutes)."
SUB/REAR*1
Switches the audio output: "SUB-OUT"
(subwoofer), "REAR-OUT" (power amplifier).
DEMO (Demonstration)
Activates the demonstration: "ON,"
"OFF."
DIM (Dimmer)
Changes the display brightness: "ON," "OFF."
M.DSPL (Motion Display)
- "SA":
to
show moving patterns and spectrum
analyzer.
-
"OFF':
to deactivate the Motion Display.
A.SCRL (Auto Scroll)
Scrolls long items automatically: "ON,"
"OFF."
LOCAL (Local Seek Mode)
- "ON":
to
only tune into stations with stronger
signals.
-
"OFF':
to tune normal reception.
MONO*2 (Monaural Mode)
Selects monaural reception mode
to
improve
poor FM reception: "ON,"
"OFF."
18
To Next Page
Loading...
