_Jiewi_ _e_ Fordetailson the operation _ page39
To select and protect images
(_) Press MENU in single-inmge mode or in index mode.
(_) Select [Protect] with A/V, and select [Multiple hnages] with 4/_-, then press Q.
Insingle-image mode:
(_) Select the image you want to protect with 41/1_,Ihen press Q.
The_g" is attached to the selected image.
(_) Press "_1_ to display other images you x_antto protect, then press Q.
0 Press MENU.
(_) Select [OK] with A, then press @.
In index mode:
(_) Select the image you want to protect with A/V/'41/_, then press _.
The _/" is attached to the selected image.
(_) To protect other images, repeat step (_).
(_) To select all the images in a folder, select the fokler selection bar with "_, then press Q.
The _/ is attached to the selected fi)lder.
(_) Press MENU.
(Z) Select [OK] with A then press @.
To cancel the protection
Select the image lkwwhich >ou vxant to cancel protection, and unlock it b> performing the
same procedure to protect it.
The o-_ (Protect) indicator disappears.
• Note that the lk_rmattiug erases all the data stored on the recording media, even if the images
are protected, and these images cannot be restored.
• It may take some time to protect an image.
Adds a print order mark (DP{}F)to the image you want to print.
See page 99.
om_(This Image) Attaches a DPOF mark to the image being selected now. Clears
the DPOF mark when the selected image has a DPOF mark.
_ (Multiple Images) Selects images and attaches DPOF marks to them. Clears DPOF
marks already attached.
Printing images shot with the camera.
See page 96.
5g
To Next Page
Loading...
Need help?
General
