Usingyour Macintosh computer
92
You can copy images to your Macintosh
comp/lter.
• "Picture Motion Brow_r is not cl)mpatible
with Macintosb computers.
Tile following eovironnlent is
reconllllended for a colnplllel _connecled IO
tile camera.
Recommendedenvironmentfor copying
images
OS (pre-installed): Mac OS 9.1/9.21 Mac 1
OS Xfvl0.] to _ 10.4)
USB jack: Provided as standard
Recommendedenvironmentfor using
"Music Transfer"
OS (pre-installed): Mac OS X lv ]0.3 to
v 10.4) _,J
CPU: iMac, eMac, iBook, PowerBook_ Power
Mac G3/G4/G5 series, Mac mini
Memory:64 MB or morn ( 128 MB or more is
recommended)
Hard Disk: Disk space required lbr
installation--approximately 250 MB
Notesonconnectingthecameratoa 3
computer
• Operations air not guaranteed for _dltile
recolllnlended conlputer environlnenls
nlentiolled above.
• If you connect two or morn USB devices to a
single computer al file same litlle_ sortie devices,
including file camera, may not operate
depending on tile lypes of USB devices you arc
using.
• Operalions arc not guaranleed when using a
USB hub.
• Connecling lhe camera using a USB interlace
lhat is compatible wilh Hi-Speed USB /USB 2.0
compliant) allows advanced transler/high speed
transl':r) _s the camera is compatible wilh Hi-
Speed USB/USB 2.0 complianl).
• Them am three modes k)r a USB connection
when connecting a computer, [Aulol/delaull
setting), [Mass Storage] and [PiclBridgel
modes. This _ction describes lhe [Auto] and
[Mass Storagel as examples. For details on
[PictBridgel, see page 68.
• When your conlputer rcsulnes honl the Stlspend
or sleep IlK)de. comnlullicalion between lhe
camera and your conlpuler nlay nol recover at
the Sallle time.
Prepare the camera and a
Macintosh computer.
Perform the same procedure as
described in "Preparing the camera and
the computer" on page 84.
Connect the camera to your
computer with the cable for multi-
use terminal.
Perform the same procedure as
described in "Connecting the camera to
yottr computer" on page 84.
Copy image files to the Macintosh
computer.
(_)Double-click the newly recognized icon
[DCIM] _ the lblder where the
images you want to copy are stored.
QDrag and drop the image files to the
hard disk icon.
The image files are copied to the hard
disk.
• For details on the storage location of tbe
im_ges and file names, see page g6.