72
G8
VIDEO," TV sound
is
output from the system
speakers automatically.
• While you are watching the TV and the
function
of
the system
is
switched to "DVD,"
sound
of
the "DVD" function is output from
the system speakers; TV sound
is
not output
via the TV speakers.
• You can control the system's volume by the
remote
of
the TV.
• Ifyou tum the system off
or
set the function
of
the system to other than "TV
NIDEO"
or
"DVD," TV sound
is
output from the TV
speakers.
You can also operate the System Audio Control
function via the TV menu. For details, refer to
the operating instructions
of
the TV.
1m
• While the TV
is
in PAP (picture and picture) mode,
the System Audio Control function will not work.
When the TV exits PAP mode, the output method
of
the
TV
returns to the one before PAP mode.
[iJ':J
• You can connect the system and the TV audio
digitally. For details, see page 28.
.'
Setting
;tb,M;iximumYolume
'Level,of;~tle~$y~ent·
..
" .
(Volume Limit)
If
you change the output method
of
the TV to the
system speakers via the TV menu (or by
pressing THEATERfTHEATRE*), loud sound
may be output depending on the volume level
of
the system. You can prevent this by limiting the
maximum level
of
the volume. For details, see
"[VOLUME LIMIT]" (page 62).
* The button name differs depending on the area.
.
Chanlili';J,~e
t~ntlJi.ge·fO;r:.:thtJ
o~~scr.'Q:~jJ;,ill
.•
l~Ot~~l1Y~.,.~{",~'.,~~~.,.,
(Language Follow)
When you change the language for the on-screen
display
of
the TV, the system's on-screen
display language is also changed. However,
when the system's on-screen display
is
displayed, this function does not work.
To Next Page