47
Advanced Recording Operations
Using special effects – Digital effect
(1) In CAMERA mode, select D EFFECT in in the menu settings (p. 97).
(2) Select the desired digital effect mode in the menu settings, then press the SEL/
PUSH EXEC dial.
The bars appear, in the STILL and LUMI. modes. The still image is stored in
memory.
(3) Turn the SEL/PUSH EXEC dial to adjust the effect, then press the dial.
Items to be adjusted
STILL The rate of the still picture you want to superimpose on the moving
picture
FLASH The interval of flash motion
LUMI. The color scheme of the area in the still picture which is to be
swapped with a moving picture
TRAIL The time until the incidental image vanishes
SLOW SHTR Shutter speed. The larger the shutter speed number, the slower the
shutter speed.
OLD MOVIE No adjustment necessary
The more bars there are on the screen, the stronger the digital effect. The bars
appear in the following modes: STILL, FLASH, LUMI. and TRAIL.
To cancel the digital effect function
Set D EFFECT to OFF in the menu settings.
1
23
MANUA L SET
OFF
ST I LL
FLASH
TRAI L
DEFFECT
[
MENU
]
:
END
LUMI
.
MANUA L SET
[
MENU
]
:
END
IIIIIIIIIIIIIIII
RETURN
MANUA L SET
OFF
ST I LL
FLASH
TRAI L
DEFFECT
[
MENU
]
:
END
LUMI
.
MANUA L SET
DEFFECT
[
MENU
]
:
END
LUMI
.
PEFFECT
DEFFECT
SLO
W
SHTR
OLD MOVI E
PROGRAM AE
LUMI.
IIIIIIIIIIIIIIII
AUTO SHTR
RTHS
W
OLS
EIVOMDLO
W
HT BAL
MENU
To Next Page
Loading...
Need help?
General