Quick Start Guide
8
Quick Start Guide
This chapter introduces you to the basic features of your
camcorder. See the page in parentheses “( )” for more
information.
Inserting a cassette (p. 20)
Connecting the power cord (p. 17)
Use the battery pack when using your camcorder outdoors (p. 12).
Open the DC IN
jack cover.
Connect the plug with its v
mark facing up.
AC power adaptor (supplied)
1Slide OPEN/
EJECT in the
direction of the arrow
and open the lid.
2Push the middle
portion of the back of
the cassette to insert.
Insert the cassette in a
straight line deeply
into the cassette
compartment with the
window facing out.
3Close the cassette
compartment by
pressing the
mark on the cassette
compartment.
After the cassette
compartment going
down completely,
close the lid until it
clicks.
EJECT
To Next Page
Loading...
