Sony DFS-700 - Control Panel Setup; Initializing User Settings; Loading User Settings from Memory; Saving User Settings in Memory

Chapter 6 System Connections and
Settings
6-10 Chapter 6 System Connections and Settings
Control Panel Setup (page 5/8)
Initializing User Settings (page 6/8)
Loading User Settings From Memory (page 7/8)
Saving User Settings in Memory (page 8/8)
Button Setting Meaning
Values (First value is factory default.)
F1 SETUP Initialize setup data. OFF/ON
To initialize an item, set it to “ON”. It is not possible
to initialize more than one item at a time.
F2
SNAP
Initialize snapshot.
F3
USRPGM
Initialize user program effects.
F4
KEYPAD
Initialize keypad data.
F5
EXEC
Execute initialization selected from
F1 to F4.
To initialize, press F3(OK); to cancel press
F5(CANCEL).
Button Setting Meaning
Values (First value is factory default.)
F1 SETUP Load setup data. OFF/ON
F2
SNAP Load snapshot. OFF/ON
F3 USRPGM Load user program effects. OFF/ON
F4 KEYPAD Load keypad data. OFF/ON
F5 EXEC Execute load selected from F1 to
F4.
To load, press F3(OK); to cancel press
F5(CANCEL).
Setup Menu Settings
Button Setting Meaning
Values (First value is factory default.)
F1 BEEPER Toggle beeper on/off. ON/OFF
ON: Beeper sounds if the fan stops, there is a
power supply error, an operation error or a key pad
operation.
OFF: Beeper only sounds if the fan stops or there is
a power supply error.
F2
BRIGHT Brightness of control panel
fluorescent indicators
LOW/HIGH
F3
SAVER
Toggle screen saver on/off. When
on, the screen saver operates when
there is no button operation for ten
minutes.
OFF/ON
F4
FTB
Enable/disable FADE TO BLACK
function.
Setting DISABL makes the function
not available.
ENABLE/DISABL
Button
Setting Meaning
Values (First value is factory default.)
F1 SETUP Save setup data. OFF/ON
F2
SNAP Save snapshot. OFF/ON
F3 USRPGM Save user program effects. OFF/ON
F4 KEYPAD Save keypad data. OFF/ON
F5 EXEC Execute save selected from F1 to
F4.
To save, press F3(OK); to cancel press
F5(CANCEL).