Sony DFS-700 - Effect Control Parameter List

Appendixes
Appendixes A-5
Effect Control Parameter List
You can change effect pattern parameters by using the
pattern adjustment knobs, joystick, and Z-knob on the
control panel.
F1 to F5: Menu page 1
F6 to F10: Menu page 2
F11 to F15: Menu page 3
X/Y: Joystick
Z: Z-knob
Effect control parameters
1010
1011
1015
to
1018
User mosaic
1040
1043
1046
1050
1055
to
1058
Pattern
No.
Effect type and adjustable parameters
F1: Size of a mosaic cell (Size = 0 to 100)
F2: Aspect ratio of a mosaic cell (Aspect = Wider to taller)
F3: Softness (Soft = 0 to 100)
F5 : Type of cell (TYPE = FLAT, GLASS 1 to GLASS 4)
Pattern mosaic
F1: Size of a mosaic cell (Size = 0 to 100)
F2: Aspect ratio of a mosaic cell (Aspect = Wider to taller)
F3: Softness (Soft = 0 to 100)
F4: Aspect ratio of the mask area (MskAsp = Wider to taller)
F5: Type of cell (TYPE = FLAT, GLASS 1 to GLASS 4)
Y&C modify
F1: Degree of luminance masking (PstSol = OFF, LEVEL 1 to LEVEL 7)
Y&C modify
F1: Degree of luminance masking (Poster = OFF, LEVEL 1 to LEVEL 7)
F2: Positive/negative selection (VIDEO = NORMAL/NEGA/MONO/
MN+NEG)
F3: Softness (Soft = 0 to 100)
Y&C modify
F1: Degree of luminance masking (Poster = OFF, LEVEL 1 to LEVEL 7)
F2: Positive/negative selection (VIDEO = NORMAL/NEGA/MONO/
MN+NEG)
F3: Softness (Soft = 0 to 100)
F4: Aspect ratio of the mask area (MskAsp = Wider to taller)
0017
0018
Wipe
F2: Rotation angle (Angle = 0 to 99)
F3: Rotation speed (Rot = 0 to 100)
F4: Auto center (CENTER = AUTO/FIX)
0021
to
0029
0034
to
0039
Wipe
F1: Pattern aspect ratio (Aspect = Taller to wider)
F2: Rotation angle (Angle = 0 to 99)
F3: Rotation speed (Rot = 0 to 100)
F4: Auto center (CENTER = AUTO/FIX)
(continued)