Sony DFS-700 - Page 84

Chapter 3 Basic Operation
3-58 Chapter 3 Basic Operation
To copy a matte color
To copy the color matte parameters from another color matte, use the
following procedure.
1 Press the MATTES button in the menu control section, to display page
2 of the MATTE menu. (Press the PAGE button to change pages.)
MATTE
2/2
FROM
INT V
TO
BORD
COPY
EXEC
PAGE F1 F2 F3
INTVID
Matte
PTN
1
F4 F5
2 Press the F1(FROM) button, to select the color matte to be copied.
3 Press the F2(TO) button, to select the color matte to which you want to
make the copy.
4 Press the F3(COPY) button, to carry out the copy.
Adjusting Color Mattes