Sony DPP-MP1 User Manual

19
GB
Continued
Printing
Printing
1 Push down the power switch
and slide it to the right, to turn
the unit on.
The indication “SETUP” flashes
on the display, and then changes
to “READY”.
Note
Do not remove or insert the print
cartridge while the "SETUP" indication
is flashing on the display.
1
4, 5
7
2
3, 4, 5
Push
2 Insert the “Memory Stick” into
the DPP-MP1.
The file with the highest number is
indicated.
If a “Memory Stick” that has only
one folder is inserted, the folder
number is not shown.
3 Use the SELECT (–/+)
buttons.
• If a folder number is not shown,
the file number flashes.
• If a folder number is shown, the
folder number flashes.
Repeatedly press the SELECT
(–/+) buttons to select the folder
number, and press the ENTER
button. The file number flashes.
4 Repeatedly press the
SELECT (–/+) buttons to
select the image file number,
and press the ENTER button.
The number of duplicates
flashes.
5 Repeatedly press the
SELECT (–/+) buttons to
select the number of
duplicates, and press the
ENTER button.
• The flashing stops and the
display stays lit.
• To reselect images for printing,
start over with the folder
number selection.
(Folder number)
File number
Number of
duplicates

Sony DPP-MP1 Specifications

General

Brand	Sony
Model	DPP-MP1
Category	Printer
Language	English