Sony DPS-R7 - Classification Chart for Editing

Classification Chart for Editing
The chart below lists all the blocks, algorithms and “OFF” indicates tells that the reverberation is switched off.
parameters which you can edit. As for the parameters, see The Reverberation block consists of REVC block and REVS
reference pages. block in ST-ST mode and of REVC block, REV1 block and
The parameters of the. Reverberation block and the B.LLOAD REV2 block in MONO-ST mode.
block varies according to the type of reverberation used.
“ST-ST” below stands for a stereo-in/stereo-out type and
“MONO-ST” stands for a monaural-in/ stereo-out type.
BLOCK.
REVERBERATION (OFF)
“PARAMETER
ALGORITHM |
REVC see page 58
REVS see page 58
REVERBERATION (ST-ST)
Buryipy 40) YeYyy uoLeoy!sseIg
REVC see page 58
REVS Algorithm1:HLR ———— see page 58
Algorithm2:RMR ——— see page 58
Algorithm3:PLR ——— see page 58
Algorithm4:GTR ——— see page 59
Algorithm5:ERF ——— see page 59
REVERBERATION (MONO-ST)
REVC ——————————— see page 59
REV1/2 Algorithm6:PLR ——— see page 59
Algorithm7:GTR ——— see page 59
Algorithm8:ERF -———— see page 59
Algorithm9:DL1 ———— see page 60
Algorithm10:DL2 ——— see page 60
— PRE-EFFECT ——~—— OFF see page 60
Algorithm1:PHS ———— see page 60
Algorithm2:FLG ———— see page 60
Algorithm3:SEQ ———— see page 60
Algorithm4:SXE ——— see page 60
Algorithm5:MXE ——— see page 60
Algorithm6:GTE ——— see page 61
—— POST-EFFECT ———— OFF ——————————— see page 61
Algorithm1:PHS -———— see page 61
Algorithm2:FLG ——— see page 61
Algorithm3:SEQ ——— see page 61
Algorithm4:SXE ———— see page 61
Algorithm5:MXE ——— see page 61
Algorithm6:GTE ——— see page 61
Algorithm7:APN ——— see page 61
INPUT see page 61
OUTPUT see page 61
LCL.MIDI see page 61
SYSTEM : see page 61
MEMORY see page 61
SYS.MIDI see page 61
B.LOAD —————— (ST-ST) —______— see page 61
(MONO-ST) -—————- see page 61
(OFF)
—-__--—-
see
page
61
esau
Kia
td