Sony DPS-R7 - Saving Edited Effects; Save Mode Indications; Assigning User Memory Numbers; Naming Saved Memories

“) Saving the Changed Effects (SAVE)
You can save the changed effects resulting from parameter
values you have changed with the Edit function.
1. Press the SAVE button.
| SAVE
w
SAVE mode indication
Algorithm name
i =HLR [
is 2256
User memory number
If you designate a memory number which is already
stored in memory, you will get the algorithm name and
the memory name after the user memory number is
displayed.
2. Turn the dial and assign a number to the edited effect.
The memory name of the original effect is displayed.
4 8 OPERATION
5.
3. Press the ENTER button.
| ENTER
©
Brilliant hall |
User memory number
Fe | UY256:HLR [
4 L
7:
The memory name of the original effect is displayed.
You cannot store the effect in the protected memory
number indicated with ‘‘ =@’’ unless you release the
protection. (See page 41.)
Name the memory.
=~ ca
&
HYE Rant hall
-»
Cursor
Fa U256:HLR
|
Turn the dial to select characters and press the SAVE
button to move the cursor. Everytime the button is
pressed, the cursor advances by one character. The
characters are lined in the order of 0-9, A-Z, a-z, symbols
and dot patterns. To delete the memory name of the
original effects, first place the cursor on the heading of
memory name indication area. Then turn the dial to
select “all clear” and press the ENTER button. (‘‘all
clear” lies before the numerals.)
Press the ENTER button after naming.
co
&