DSC-W830
3-3
3-3. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY
The data can be copied/erased by the operations on the MENU screen. (When erasing the data, execute formatting the internal memory.)
Note 1:When replacing the SY-1035 board, erase the data in internal memory of the board before replacement.
Note 2:When replacing the SY-1035 board, execute formatting and initialize the internal memory after replacement.
Method for Copying the Data in Internal Memory
Copy
Copies all images in the internal memory to a memory card.
1. Insert a memory card with sufficient free capacity into the camera.
2. MENU -
(Settings) - (Memory Card Tool) - [Copy] - [OK] -
Note
Make sure there is sufficient battery power. Otherwise, the battery power may run out when you
attempt to copy image files, causing the copy to fail and possibly corrupt the data.
Images cannot be copied individually.
Original images in internal memory are retained even after copying. To delete contents of internal
memory, remove the memory card after copying, then format internal memory ([Format] in
[Memory Card Tool]).
A new folder is created on the memory card and all data will be copied to it. You cannot choose a
specific folder and copy images to it.
Method for Formatting the Internal Memory or “Memory Stick Duo” media
Format
Formats the memory card.
When you use a memory card with this camera for the first time, it is recommended to format the card
using the camera for stable performance of the memory card before shooting. Note that formatting
permanently erases all data on the memory card, and is unrecoverable. Save precious data on a
computer, etc.
1. MENU -
(Settings) - (Internal Memory Tool) - [Format] - [OK] -
Note
Note that formatting permanently erases all data including even protected images.
To Next Page
Loading...
Need help?
General
