Sony DSR-2000AP - Setting Time Code and User Bits

40 Chapter 2 Setting/Displaying Time Data and Text Information
Chapter 2 Setting/Displaying Time Data and Text Information
Setting Time Code and User Bits
Setting an initial time code value
Set the buttons and switches as shown below.
Button/switch settings
To set an initial time code value, use the following procedure.
REMOTE button
CHARACTER switch
FREE RUN/REC RUN switch
INT/EXT−PRESET/REGEN switch
Buttons/switches Settings
REMOTE button
Off
CHARACTER switch ON
INT/EXT−PRESET/REGEN switch INT−PRESET
FREE RUN/REC RUN switch
As required
DF/NDF switch As required
RESET button
127
5
(3),4
Display section
FREE RUN/REC RUN switch
DF/NDF switch