Sony DSR-2000AP - Specifications

Appendixes
Appendixes 141
Specifications
General
Power requirements
100 to 240 VAC, 50/60 Hz
Power consumption
120 W
Peak inrush current
(1) Power ON, current probe method: 65A (240V)
(2) Hot switching inrush current, measured in
accordance with European standard
EN55103-1: 15A (230V)
Operating temperature
5˚C to 40˚C (41˚F to 104˚F)
Storage temperature
–20˚C to +60˚C (–4˚F to +140˚F)
Humidity Maximum 80% (Operating)
Maximum 90% (Storage)
Mass About 18 kg (39 lb 10 oz)
Dimensions (w/h/d, excluding projections)
427 × 174.5 × 495.5 mm
(16
7
/8 × 6
7
/8 × 19
5
/8 inches)
424 (16 3/4)
427 (16 7/8)
495.5 (19 5/8)
4.8 (7/32)
400 (15 3/4)
19.7 (2 5/32)
52.5 (2 1/8)
372 (14 3/4)
27.5 (1 1/8)
16.5 (21/32)
174.5
(6 7/8)
Tape transport control system
Tape speed 28.193 mm/s (DSR-2000A)
28.221 mm/s (DSR-2000AP)
Recording/playback time
Using PDV-184ME standard-size
cassette: 184 minutes or less
Using PDVM-40ME mini-size
cassette: 40 minutes or less
Fast forward/rewind time
Using PDV-184ME standard-size
cassette: 3 minutes or less
Using PDVM-40ME mini-size
cassette: 1 minute or less
Search speed Up to 60 times normal in both
directions
Video performance
Band width Composite (DSR-2000A):
30 Hz to 4.2 MHz ±1.0 dB (Y)
Composite (DSR-2000AP):
25 Hz to 4.8 MHz ±1.0 dB (Y)
S-Video (DSR-2000A):
30 Hz to 5.0 MHz ±1.0dB (Y),
5.75 MHz +0/–3.0 dB (Y) (TM)
S-Video (DSR-2000AP):
25 Hz to 5.0 MHz ±1.0dB (Y),
5.5 MHz +1.0/–2.0 dB (Y),
5.75 MHz +0/–3.0 dB (Y) (TM)
Component (DSR-2000A):
30 Hz to 5.0 MHz ±1.0 dB (Y),
5.75 MHz +0/–3.0 dB (Y) (TM),
30 Hz to 1.3 MHz ±1.0 dB (C),
1.5 MHz +0/–5.0 dB (C)
Component (DSR-2000AP):
25 Hz to 5.0 MHz ±1.0 dB (Y),
5.5 MHz +1.0/–2.0 dB (Y),
5.75 MHz +1.0/–3.0 dB (Y) (TM),
25 Hz to 1.5 MHz ±1.0 dB (C),
2.0 MHz +1.0/–2.0 dB (C)
S/N Composite I/O (Y):
53 dB or more
S-Video I/O (Y): 55 dB or more
Component I/O (Y):
55 dB or more
Y/C delay 30 ns or less
K-factor 2.0% or less (K2T, KPB)
Unit: mm (inches)