54
DVP-S9
Pin No. Pin Name I/O Description
198, 199 PWM0, PWM1 O
Sled motor drive signal output to the FAN8034 (IC401)
200 PWM2 O
Motor drive signal output terminal Not used
201 VDD 3.3V —
Power supply terminal (+3.3V) (for digital system)
202, 203 PDM0, PDM1 O
Tracking coil drive signal output to the FAN8034 (IC401)
204, 205 PDM2, PDM3 O
Focusing coil drive signal output to the FAN8034 (IC401)
206 VSS —
Ground terminal (for digital system)
207 XWR I
Write enable signal input terminal
208 XRD I
Read enable signal input terminal
To Next Page
