Emma User Guide 24
Security
You need an USB Activation dongle when you run the Activation service. Service
cards are no longer supported by Emma.
USB Activation dongle
You need a dongle to use the Activation service. If you enter an incorrect password
(PIN code) three times, the dongle will stop to function.
Installing Software for Activation Dongle
You need to install Middleware for the Activation dongle to work. Please uninstall any
previous versions of SafeSign or RaakSign before continuing with the installation.
1. Go to http://software.sonymobile.com/emma .
2. Under Downloads, click Drivers.
3. Under Non Product Specific, click Activation Dongle.
4. If the File Download window is shown, click Save.
5. Choose where to save the file. Click Save.
6. In the Download complete window, click Close.
7. Extract the file and choose where to save it.
8. Go to the folder where the files were extracted.
9. Double click on the file SafeSign-Identity-Client-3.0.33-user.exe.
10. Follow the instructions to install the Middleware on your computer.
Getting a New PIN code
If you enter the wrong PIN three times the dongle will be locked.
A popup window will display that the dongle is locked, and you need to contact
your local SEMC Customer Service representative in order to have the PIN reset.
Forgotten PIN can be retrieved by contacting your local SEMC Customer Service
representative.
Testing the Activation Dongle
By visiting the Dongle test page you can test the activation dongle.
1. Go to https://cssemla.extranet.sonyericsson.com/ .
2. In the Choose a digital certificate window, click OK.
3. In the Enter PIN window, enter your PIN code, click OK.
4. If a test page is shown the activation dongle is working properly.
To Next Page
Loading...
