Sony FH-B411 - Presetting Radio Stations; Playing Preset Radio Stations

1 Make sure that the PRESET indication is
off. If the indicator is on, press
PRESET /TUNING to turn off.
2 Press BAND to select the desired band.
3 Press TUNER(+/~ to tune in the station
you want to store.
4 Press MEMORY.
“MEMORY” and a letter (A, B or C)
appear in the display.
5 Decide on a letter (A, B or C) for the
radio station, Press SHIFT to display the
letter you have decided on.
The last memorized number of the code
appears.
last memorized code
6 Press MEMORY.
“MEMORY” disappears, and the station
is stored at the code you have decided
on.
7 Repeat steps 2 to 6 for each station you
want to store.
To erase a stored station
Storing a new station at a previously used
code will erase the old station and replace it
with the new station.
If you have trouble storing a station
Make sure “MEMORY” is lit in the display.
If not, press MEMORY again so that
“MEMORY” lights up (for about eight
seconds) in the display, and then proceed
with steps 5 and 6.
10 anal
if you made a mistake
Press MEMORY again and then proceed
with steps 5 and 6.
ss
Playing Preset Radio
Stations
Once you have preset the stations, use the
PRESET/TUNING button to quickly tune
in your favorite stations.
SYSTEM POWER-+ON
1 Press PRESET/TUNING to enter the
preset mode.
"PRESET" and a code appear.
2 Press SHIFT to select a desired letter of
the code,
3 Press TUNER (+/-) (or PRESET (+/-)
on the remote commander) to tune ina
preset station.
The station frequency appears and the
station begins broadcasting.