Sony Float Run User Manual

Help Guide
Wireless Stereo Headset
Float Run
Charging the headset
The headset contains a built-in lithium-ion rechargeable battery. Use the supplied USB Type-C cable to charge the
headset before use.
Open the USB Type-C port cover.
1
Connect the headset to an AC outlet.
Use the supplied USB Type-C cable and a commercially available USB AC adaptor.
A: USB AC adaptor
The indicator (orange) on the headset lights up.
Charging is completed in about 3 hours
*
and the indicator turns off automatically.
After charging is complete, disconnect the USB Type-C cable and close the USB Type-C port cover securely to
prevent water or dust from entering the headset.
2
Time required for charging the empty battery to its full capacity. The charging time may differ depending on the conditions of use.
*
14

Sony Float Run Specifications

General

Type	Open-ear
Connectivity	Bluetooth
Driver Size	16 mm
Weight	33 g
Frequency Response	20 Hz - 20, 000 Hz
Bluetooth Version	5.0
Battery Life	Up to 10 hours
Water Resistance	IPX4
Charging Time	Approx. 3 hours
Wireless Range	10m