Help Guide
Wireless Stereo Headset
Float Run
Functions for a phone call
The functions available during a call may vary depending on the profile supported by your smartphone or mobile phone.
In addition, even if the profile is the same, the available functions may vary depending on the smartphone or mobile
phone.
Depending on the connected device or the application you are using, the functions may not work properly even if you try
to operate them with the headset.
Refer to the operating instructions supplied with the smartphone or mobile phone.
Supported profile: HFP (Hands-free Profile)
During standby/music playback
Press the
(call) button twice in 0.5 seconds to start up the voice dial function of the smartphone/mobile phone, or
activate the Google™ app on the Android smartphone or Siri on the iPhone.
Outgoing call
Press the
(call) button once to cancel an outgoing call.
Press and hold the
(call) button for about 2 seconds to change the call device back and forth from the headset to
the smartphone/mobile phone.
Incoming call
Press the
(call) button once to answer a call.
Press and hold the
(call) button for about 2 seconds to reject a call.
During call
Press the
(call) button once to finish a call.
Press and hold the
(call) button for about 2 seconds to change the call device back and forth from the headset to
the smartphone/mobile phone.
Supported profile: HSP (Headset Profile)
Outgoing call
Press the
(call) button once to cancel an outgoing call.
Incoming call
Press the
(call) button once to answer a call.
During call
To Next Page
Loading...
Need help?
General
