Sony GTK-XB72 - KEY (L) Board (Left Side); KEY (R) Board (Right Side)

GTK-XB72
12
Sony CONFIDENTIAL
For Authorized Servicer
2-5. KEY (L) BOARD (LEFT SIDE)
2-6. KEY (R) BOARD (RIGHT SIDE)
2 cable (KEY-MAIN)
3 Remove the KEY (L) board block
in the direction of the arrow.
4 FFC (KL-RA and KR-RA)
(12 core) (XP5)
5 cable (KEY-MIC)
connector (2P)
(XP7)
6 KEY (L) board
Note:
When installing the KEY (L) board,
align the four bosses and four holes.
1 two screws
(M3 u 10)
1 screw
(M3 u 10)
1 four screws
(M3 u 10)
terminal
side
hole
hole
two holes
boss
boss
boss
boss
top side
front side
side panel
assy (left)
1 KEY (R) board cable connector
(2P) (XP12)
3 Remove the KEY (R) board block
in the direction of the arrow.
4 FFC (KL-RA and KR-RA)
(12 core) (XP9)
5 KEY (R) board
Note:
When installing the KEY (R) board,
align the four bosses and four holes.
2 three screws
(M3 u 10)
1 three screws
(M3 u 10)
terminal side
two
holes
hole
hole
boss
boss
two
bosses
top side
rear side
side panel
assy (right)
SYSSET
2019/01/1806:06:34(GMT+09:00)
jomi