Sony GTK-XB72 - Disassembly; Disassembly Flow

GTK-XB72
8
Sony CONFIDENTIAL
For Authorized Servicer
SECTION 2
DISASSEMBLY
• This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
Note: The rod antenna drawn in each illustration is installed in GTK-XB72 except AEP and UK. There is no the rod antenna in GTK-XB72 of AEP and UK.
2-2. SIDE PANEL ASSY BLOCK-1
(Page 9)
2-8. MAIN BLOCK
(Page 14)
2-10. TOP BRACKET
(Page 15)
2-12. MIC BOARD
(Page 17)
SET
2-13. MAIN BOARD
(Page 18)
2-11. POWER BOARD
(Page 16)
2-14. FRONT PANEL ASSY BLOCK-1
(Page 19)
2-15. FRONT PANEL ASSY BLOCK-2
(Page 20)
2-16. SPEAKER UNIT (WF)
(Page 21)
2-17. SPEAKER UNIT (TW)
(Page 22)
2-18. TOP TUBE LED BOARD,
TOP SPK LED BOARD,
TOP FLASH LED BOARD
(Page 23)
2-19. BOTTOM TUBE LED BOARD,
BOTTOM SPK LED BOARD,
BOTTOM FLASH LED BOARD
(Page 24)
2-9. ROD ANTENNA
(Page 15)
2-3. SIDE PANEL ASSY BLOCK-2
(LEFT SIDE)
(Page 10)
2-4. SIDE PANEL ASSY BLOCK-2
(RIGHT SIDE)
(Page 11)
2-5. KEY (L) BOARD (LEFT SIDE)
(Page 12)
2-20. FRONT PANEL ASSY
(Page 25)
2-6. KEY (R) BOARD (RIGHT SIDE)
(Page 12)
2-7. NFC BOARD
(RIGHT SIDE)
(Page 13)

JIG
When disassembling the unit, use the following
jig for speaker removal.
Part No. Description
J-2501-238-A JIG FOR SPEAKER REMOVAL
(US, CND)
SYSSET
2019/01/1806:06:34(GMT+09:00)
jomi