Sony GTK-XB72 - POWER Board

GTK-XB72
16
Sony CONFIDENTIAL
For Authorized Servicer
2-11. POWER BOARD
2 two screws
(M3 u 10)
7 POWER board
Note:
When installing the POWER
board, align the rib and hole.
front side
3 two screws
(3 u 6)
3 screw
(3 u 6)
3 screw
(3 u 6)
3 screw
(3 u 6)
1 POWER board cable
connector (9P) (XP20)
6 Remove the POWER board
in the direction of the arrow.
rib
4
Slide the
POWER board in
the direction of the arrow.
5
Lift up the
POWER board in
the direction of the arrow.
hole
rib
rear side
top side
SYSSET
2019/01/1806:06:34(GMT+09:00)
jomi