Sony GTK-XB72 - Main Block

GTK-XB72
14
Sony CONFIDENTIAL
For Authorized Servicer
2-8. MAIN BLOCK
1 two screws
(M4 u 20)
1 two screws
(M4 u 20)
1 three screws
(M4 u 20)
2 Lift up the main block in the
direction of the arrow.
3 Pull out the main block
slightly in the direction
of the arrow.
4 cable (MAIN-TW) connector
(6P) (XP16)
5 cable (MAIN-WF) connector
(4P) (XP15)
6 FFC (TOP LED-MAIN)
(28 core) (XP1)
terminal
side
7 Remove the main block in
the direction of the arrow.
8 main block
Note:
When installing the main block,
align the three ribs and three holes.
front side
top side
rear side
left side
hole
hole
hole
rib
rib
rib
SYSSET
2019/01/1806:06:34(GMT+09:00)
jomi