Sony GTK-XB72 - TOP TUBE LED Board, TOP SPK LED Board, TOP FLASH LED Board

GTK-XB72
23
Sony CONFIDENTIAL
For Authorized Servicer
2-18. TOP TUBE LED BOARD, TOP SPK LED BOARD, TOP FLASH LED BOARD
4 two screws
(M3 u 10)
5 Remove the TOP FLASH LED board
block in the direction of the arrow.
2 FFC (LA-RGB)
(28 core) (XP4)
7 FFC (TOP LED-BOTM LED)
(12 core) (XP4)
0 FFC (TOP LED-MAIN)
(28 core) (XP7)
9 FFC (LA-RGB)
(28 core) (XP6)
qa cable (LA-SA and LB-SB)
connector (4P) (XP3)
3 TOP TUBE LED board
qd TOP SPK LED board
Note 2:
When installing the TOP
SPK LED board, align the
protrusion and hole.
qf TOP FLASH LED
board
8 TOP FLASH LED board block
Note 1:
When installing the TOP FLASH LED board
block, align the two bosses and two holes.
1 Draw the TOP TUBE LED
board out of the two grooves
in front panel assy block.
terminal side
6 Draw the TOP SPK LED board out of the
two grooves in front panel assy block.
qs Draw the protrusion of
TOP SPK LED board
out of the hole in TOP
FLASH LED board.
hole
hole
hole
protrusion
terminal
side
terminal
side
terminal
side
top side
front side
left side
right side
bottom side
front side
right side
groove
groove
groove boss
groove
boss
))&/$5*%FRUHDQGFDEOH0$,17:VHWWLQJ
FFC (LA-RGB) (28 core)
cable
(MAIN-TW)
TOP FLASH LED board
TOP TUBE LED board
speaker unit (TW)
(tweeter: top right)
top side
bottom side
–5HDUYLHZ–
When installing the FFC (LA-RGB) (28 core), pass the
FFC (LA-RGB) (28 core) through the upper side of the
cable (MAIN-TW).
front panel
assy
Turn over the TOP FLASH
LED board block.
SYSSET
2019/01/1806:06:34(GMT+09:00)
jomi