To Next PageTo Next Page
Need help?Do you have a question about the Sony HBD-E690 and is the answer not in the manual?
General| Audio Output Power | 1000 W |
|---|---|
| Number of Channels | 5.1 |
| Blu-ray Playback | Yes |
| DVD Playback | Yes |
| HDMI Outputs | 1 |
| USB Playback | Yes |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| 3D Compatibility | Yes |
| Type | Blu-ray Home Theater System |
| CD Playback | Yes |
| Wireless Rear Speaker | No |
| DLNA Certified | Yes |
| Ethernet | Yes |
| NFC | Yes |
Instructions and diagram for checking AC leakage from exposed metal parts.
Precautions for optical pick-up block handling and laser emission check.
Steps for writing OP data after replacing optical device or MB148 board.
Measures to prevent static electricity damage when working with the optical device.
Flowchart for checking the drive section's ability to reproduce discs.
Flowchart for checking the optical device's IOP status in service mode.
Steps to write OP data and verify playback performance after replacement.
Information on compatible parts for the BD drive (BPX-7) mechanism.
Safety procedure for discharging capacitors to prevent electric shock.
Notes on applying compound when replacing IC3102, IC3302, or the AMP board.
A flowchart detailing the sequence of disassembly steps for the unit.
Procedure for removing the BD drive unit (BPX-7), including boss alignment.
Steps for removing the MB148 main board, including heat sink and radiation sheet.
Steps for removing the switching regulator (SWR1) unit and associated parts.
Procedure for removing the AMP board and its heat sink.
Detailed instructions and illustrations for removing the optical pick-up block and associated wires.
Steps to perform a cold reset, clearing unit data except BD/DVD data.
Guide to restore unit settings to factory defaults, including personal information.
Steps to access the BD service mode using the remote commander.
Overview of available functions in BD service mode, including diagnostics and settings.
A visual representation of the service mode menu hierarchy and navigation.
How to navigate the main service mode menu and access functions.
Explains how to select test categories and devices within the Diag menu.
Steps for performing video (color bar) and audio (tone sound) tests in Diag.
Steps for testing audio input from various sources and selecting input devices.
How to view error logs and copy them to a USB memory device.
Caution against using factory initialize, as it might not execute correctly.
Lists the selectable items within the Drive menu for diagnostics and tools.
Steps to start the process of writing OP data to the drive.
How to check the result of the OP data write operation.
Procedures for confirming playback using test discs (BLX, CD) and various outputs.
Procedure for checking FM tuner functionality using a signal generator.
Block diagram illustrating the amplifier circuitry, including power stages and speaker outputs.
Block diagram of the power supply unit, showing voltage regulation and distribution.
Block diagram of the TAS5538DGGR stream processor IC.
Block diagram of the STA516BE power amplifier IC.
Block diagram of the STA516BE power amplifier IC.
Block diagram of the TPIC2050RDFDRG4 IC, detailing its motor driver functions.
Block diagram of the MFI341S2162 system controller IC.
Block diagram of the PT6315LQ display driver IC.
Detailed pinout and function descriptions for IC101 on the MB148 board.
Continued pinout and function descriptions for IC101 on MB148 board.
Pinout and function details for MB148 board ICs starting with 'E'.
Checks output voltages of the switching regulator (SWR1) at CN301.
Instructions to check specific fuses for damage.
Checks power control signals and voltages on MB148 board.
Verifies if sound is outputted normally from speakers.
Checks if the disc drive is functioning correctly.
Verifies power supply to the audio block.
Checks PWM signals from AMP board IC3001 pins for speaker output.
Checks signal output from AMP board ICs (IC3102, IC3302) to speakers.
Checks drive operation and power supply to video components.
Verifies if VIDEO OUT signal is outputted normally.
Verifies if only the digital output (HDMI) is affected.
Checks input and output voltages for IC705 and IC704 related to digital output.
