– 4 –
SECTION 1
SERVICING NOTE
OPENING THE DISC TRAY WHEN POWER IS OFF
1
Using a thin screwdriver, rotate the internal cam
in the arrow direction completely.
2
Open the glass door, and pull out the loading panel.
1
2
Pull up the glass door,
in the arrow direction.
4
Screw (PTP 2.6x6)
3
Bracket (shaft)
(Bottom side)
1
When securing this part, position at the
center to allow some play. Open and close
the glass window several times, and check
that the parts do not touch each other.
ATTACHING THE GLASS ASSEMBLY
• Attach according to steps 1 to 4.
To Next Page
Loading...
