Do you have a question about the Sony HCD-SH2000 and is the answer not in the manual?
RMS rated power | 1000 W |
---|---|
Output impedance | 10000 Ω |
Input sensitivity | 1 mV |
Audio output channels | 2.0 channels |
Signal-to-Noise Ratio (SNR) | 90 dB |
Total Harmonic Distortion (THD) | 1 % |
Dynamic power per channel (4 Ohm) | 500 W |
Power output per channel (20-20KHz@8 Ohm) | - W |
Audio (L/R) in | 4 |
USB ports quantity | 1 |
Speakers connectivity type | - |
Audio formats supported | AAC, MP3, WMA |
Ethernet LAN | No |
AM band range | 530 - 1710 kHz |
FM band range | 87.5 - 108 MHz |
Supported radio bands | AM, FM |
Optical drive type | CD player |
Optical drive included | Yes |
Product color | Black |
Apple docking compatibility | Not supported |
AC input voltage | 100-240 V |
AC input frequency | 50 - 60 Hz |
Power consumption (typical) | 320 W |
Depth | 420 mm |
---|---|
Width | 510 mm |
Height | 235 mm |
Weight | 10000 g |
Describes methods to check AC leakage current from metal parts to earth ground.
Highlights critical components for safe operation requiring specific replacement parts.
Covers chip component replacement, flexible circuit board repair, and unleaded solder.
Provides guidelines for handling the optical pick-up and checking laser diode emission.
Addresses replacement notes for DMB21, MS-214, and main board discrimination.
Outlines the sequence for disassembling the unit, starting with panels.
Details removal steps for boards like DMB21, CDM, Damp, Main, and Switching Regulator.
Provides instructions for disassembling the CD mechanism deck blocks.
Explains how to check indicators, LEDs, keys, and software versions.
Outlines the procedure for checking FM auto stop using a signal generator.